800-558-7228
0
Dressta 560E Parts | Axle, Transmission & Components | FP Smith Parts & Equipment

Dressta 560E Parts | Axle, Transmission & Components | FP Smith Parts & Equipment

Leading the Parts Industry since 1947. FP Smith Parts & Equipment stocks a wide range of Dressta 560E parts for this mid-to-large wheel loader. We maintain real physical inventory of new OEM surplus, quality used, and reconditioned components at our 20-acre facility in Fairfield, California. We are not brokers — most parts are on the shelf and ready to ship.

Learn more: Home • Full Parts Catalog • Heavy Equipment Parts • Rebuild Services

Dressta 560E Parts Inventory

The Dressta 560E is a mid-to-large wheel loader designed for construction, aggregate, and industrial applications. We support owners and fleets with both common wear items and hard-to-find components.

Parts Categories We Stock for the 560E

  • Axles, Differentials & Final Drives — Axle assemblies, differentials, planetary final drives, bearings, seals, and related components
  • Transmission & Torque Converter — Transmission assemblies, torque converters, clutch packs, seals, pumps, valves, and related components
  • Hydraulics — Pumps, valves, cylinders, seal kits, hoses and fittings
  • Engine & Cooling — Rebuild kits, bearings, gaskets, radiators, oil coolers, and related components
  • Steering, Brakes & Electrical — Steering components, brake parts, starters, alternators, and sensors
  • Loader Linkage & Attachments — Pins, bushings, bucket components, and related wear parts

Transmission & Torque Converter Parts

We also stock and source Dressta 560E transmission and torque converter related components, including assemblies, clutch packs, seals, pumps, valves, lines, fittings, and supporting hardware commonly needed during powertrain service or rebuilds.

Why Choose FP Smith for Dressta 560E Parts?

  • Physical Stocking — Millions of parts on hand in Fairfield, CA — ready for same-day shipping on most orders placed before 3 PM PST
  • Legacy Expertise — Decades of experience with Dressta, Dresser, International Harvester, and related equipment
  • Hard-to-Find Components — Strong inventory of surplus and used parts that are no longer readily available through traditional dealer channels
  • Cost Savings — Quality used, reconditioned, and OEM surplus options at competitive prices versus new OEM list
  • Technical Support — Knowledgeable team that understands interchanges, applications, and model-specific requirements
  • Rebuild Capability — In-house and partner support for transmissions, torque converters, axles, and major components

In addition to the 560E, FP Smith carries parts for many Dressta and Dresser wheel loaders including the 555B, 555C, 560B, 560C, 510, 515, 530 series, and related machines.

Dressta 560E Technical Specifications

Key specifications for the Dressta 560E wheel loader (based on available factory and published data). Actual figures can vary by configuration, serial number, bucket, and options.

Engine

  • Type — Typically a diesel engine in the mid-to-large class (Cummins or equivalent depending on production period)
  • Net power — approximately 180–220 hp class

Weights

  • Operating weight — approximately 15–18 tons depending on configuration

Powertrain & Loader

  • Transmission — Powershift with torque converter
  • Drive — 4-wheel drive
  • Bucket capacity — typically in the 3.0–4.0 m³ range depending on application

Note: Always verify exact specifications against the machine’s serial number plate and the official Dressta / Dresser service literature for critical applications.

Engine Maintenance Guidance

Proper maintenance is critical for longevity. Follow the specific Operation & Maintenance Manual for your engine serial number. Oil analysis can help optimize intervals.

Typical Service Guidelines

  • Engine oil & filters — Commonly every 250 hours or as specified (confirm with oil analysis for possible extension).
  • Fuel filters — Replace at the recommended interval or as indicated by restriction.
  • Air filters — Inspect frequently and replace based on restriction or operating conditions.
  • Coolant — Maintain proper level and condition; follow recommended change intervals.
  • Valve adjustment — Perform at the interval specified in the engine manual.

Daily checks should include oil level, coolant level, fuel system, air intake, and visual inspection for leaks or damage.

Drivetrain & Component Wear Management – 560E

Proper management of the axles, final drives, transmission, and loader linkage is one of the biggest factors in controlling owning costs on the Dressta 560E.

Best Practices

  • Regular inspection — Check axles, differentials, final drives, and loader pins/bushings for play, leaks, and wear.
  • Lubrication — Maintain proper grease intervals on linkage pins, articulation joints, and driveline components.
  • Tire management — Monitor tire condition and pressure; mismatched or worn tires increase stress on the drivetrain.
  • Matching components — When rebuilding, replace related wear items together where practical to avoid accelerated wear of new parts against worn surfaces.
  • Operating habits — Avoid aggressive spinning, excessive articulation under load, and prolonged high-speed travel on rough terrain when possible.

FP Smith stocks a wide range of components for the 560E including axles, final drives, transmission parts, hydraulic components, engine parts, and loader linkage wear items. We can also help with hard-to-find items and advise on interchange or rebuild options.