800-558-7228
0
Dresser 560C Parts | Torque Converter, Transmission & Components | FP Smith Parts & Equipment

Dressta 560C Parts | Torque Converter, Transmission & Components | FP Smith Parts & Equipment

Leading the Parts Industry since 1947. FP Smith Parts & Equipment stocks a wide range of Dressta 560C parts for this large wheel loader. We maintain real physical inventory of new OEM surplus, quality used, and reconditioned components at our 20-acre facility in Fairfield, California. We are not brokers — most parts are on the shelf and ready to ship.

Learn more: Home • Full Parts Catalog • Heavy Equipment Parts • Rebuild Services

Dressta 560C Parts Inventory

The Dressta 560C is a large production wheel loader known for its power, durability, and demanding drivetrain and hydraulic requirements. We support owners and fleets with both common wear items and hard-to-find components.

Parts Categories We Stock for the 560C

  • Axles, Differentials & Final Drives — Axle assemblies, differentials, planetary final drives, bearings, seals, and related components
  • Transmission & Torque Converter — Transmission assemblies, torque converters, clutch packs, seals, pumps, valves, and related piping/components
  • Hydraulics — Pumps, valves, cylinders, seal kits, hoses and fittings
  • Engine & Cooling — Rebuild kits, bearings, gaskets, radiators, oil coolers, and related components
  • Steering, Brakes & Electrical — Steering components, brake parts, starters, alternators, and sensors
  • Loader Linkage & Attachments — Pins, bushings, bucket components, and related wear parts

Transmission & Torque Converter Piping

We also stock and source Dressta 560C transmission and torque converter related components, including piping, lines, fittings, seals, and supporting hardware commonly needed during powertrain service or rebuilds.

Why Choose FP Smith for Dressta 560C Parts?

  • Physical Stocking — Millions of parts on hand in Fairfield, CA — ready for same-day shipping on most orders placed before 3 PM PST
  • Legacy Expertise — Decades of experience with Dresser, International Harvester Payline, and related equipment
  • Hard-to-Find Components — Strong inventory of surplus and used parts that are no longer readily available through traditional dealer channels
  • Cost Savings — Quality used, reconditioned, and OEM surplus options at competitive prices versus new OEM list
  • Technical Support — Knowledgeable team that understands interchanges, applications, and model-specific requirements
  • Rebuild Capability — In-house and partner support for transmissions, torque converters, axles, and major components

In addition to the 560C, FP Smith carries parts for many Dresser and International Harvester wheel loaders and crawler models, including the 560B and related machines.

Dressta 560C Technical Specifications

Key specifications for the Dressta 560C wheel loader (based on available factory and published data). Actual figures can vary by configuration, serial number, bucket, and options.

Engine

  • Make / Model — Cummins KT-19C (common)
  • Type — 6-cylinder diesel, turbocharged
  • Displacement — approximately 18.9 L
  • Net Power — approximately 309 kW (414–415 hp class)

Weights

  • Operating weight — approximately 39,200–42,000 kg (86,000–92,500 lb range depending on configuration)

Powertrain & Travel

  • Transmission — Powershift
  • Torque converter — Single-stage
  • Travel speed — approximately 32.5 km/h (20 mph)
  • Drive — 4-wheel drive

Loader Performance

  • Bucket capacity range — approximately 5.7 – 11.5 m³ (7.5 – 15 yd³ class)
  • Standard tires — 29.5 × 29
  • Lifting force — approximately 341 kN

Note: The 560C shares many components and specifications with the earlier 560B. Always verify exact specifications against the machine’s serial number plate and the official Dresser / International service literature for critical applications.

Cummins KT-19C Engine Maintenance

The Dressta 560C is commonly powered by the Cummins KT-19C. Proper maintenance is critical for longevity in heavy wheel loader applications. Follow the specific Operation & Maintenance Manual for your engine serial number. Oil analysis can help optimize intervals.

Typical Service Guidelines

  • Engine oil & filters — Commonly every 250 hours or 6 months under standard industrial duty (confirm with oil analysis for possible extension).
  • Fuel filters — Typically every 500 hours or as indicated by restriction.
  • Air filters — Inspect frequently and replace based on restriction or operating conditions.
  • Coolant — Maintain proper level and condition; follow recommended change intervals for the coolant type in use.
  • Valve adjustment — Perform at the interval specified in the engine manual.

Daily checks should include oil level, coolant level, fuel system, air intake, and visual inspection for leaks or damage.

Drivetrain & Component Wear Management – 560C

Proper management of the axles, final drives, transmission, and loader linkage is one of the biggest factors in controlling owning costs on the Dressta 560C.

Best Practices

  • Regular inspection — Check axles, differentials, final drives, and loader pins/bushings for play, leaks, and wear.
  • Lubrication — Maintain proper grease intervals on linkage pins, articulation joints, and driveline components.
  • Tire management — Monitor tire condition and pressure; mismatched or worn tires increase stress on the drivetrain.
  • Matching components — When rebuilding, replace related wear items together where practical to avoid accelerated wear of new parts against worn surfaces.
  • Operating habits — Avoid aggressive spinning, excessive articulation under load, and prolonged high-speed travel on rough terrain when possible.

FP Smith stocks a wide range of components for the 560C including axles, final drives, transmission parts, hydraulic components, engine parts, and loader linkage wear items. We can also help with hard-to-find items and advise on interchange or rebuild options.